Item | Image | Description | Notes | Meadows & Passmore Partnumber |
Book |
|
Anniversary Clock Identification by Mervyn Passmore. 350 pages, profusely illustrated, with details of almost every
mass produced Anniversary Clock movement made in the last 100 years. |
  |
0412 021226 |
Book |
|
Anniversary Clock Adjusting by Mervyn Passmore. An invaluable guide to setting up and regulating these delicate movements. Includes
copies of the widely used beat setting scale. |
Also available in French and German |
0412 016226 |
Book |
|
Horolovar 400 Day Repair Guide. The original guide, with line drawings of almost every 400 Day backplate, plus chapters on repairs and
makers etc. A valuable source of useful information. |
Hardback |
0412 000126 |
Suspension wires |
|
Pack of replacement suspension wires for the Kern & Sohne Miniature, 44mm x 60mm, sometimes marked K.u.S. MIV Anniversary Clock movement. 0.0023"/0.058mm |
|
0401 002315 |
Ready-made suspension unit |
|
A ready-to-use suspension unit to suit the Kern & Sohne Miniature, 44mm x 60mm, sometimes marked K.u.S. MIV Anniversary Clock movement. Unit number 12F |
|
0679 001206 |
Top suspension block |
|
A top block to suit the Kern & Sohne Miniature, 44mm x 60mm, sometimes marked K.u.S. MIV Anniversary Clock movement. |
|
1301 010115 |
Suspension fork |
|
A suspension fork to suit the Kern & Sohne Miniature, 44mm x 60mm, sometimes marked K.u.S. MIV Anniversary Clock movement. |
|
1301 020215 |
Bottom suspension block |
|
A bottom block to suit the Kern & Sohne Miniature, 44mm x 60mm, sometimes marked K.u.S. MIV Anniversary Clock movement. |
|
1301 030115 |
Mainspring |
|
A replacement mainspring for the Kern & Sohne Miniature, 44mm x 60mm, sometimes marked K.u.S. MIV Anniversary Clock movement. |
|
0607 143015 |
Winding key |
|
A replacement steel winding key for the Kern & Sohne Miniature, 44mm x 60mm, sometimes marked K.u.S. MIV Anniversary Clock movement. |
When a repairer overhauls a clock, the winding shaft is normally "squared off" with a file. This key assumes that the shaft has not been reduced in size since new. |
0333 035014 |
Tool |
|
A tool designed and manufactured by the Horolovar Company, for setting Torsion clocks in beat. |
|
0595 040015 |
Tool |
|
Jig, designed by the author of Anniversary Clock Adjusting, for assembly and adjustment of Torsion Clock suspension units. |
|
1302 000115 |